Ceiling Modules | DAMPA DCC 300/200
The DCC 300/200 Ceiling Panels are made from
stove-enamelled 0.6/0.5 mm galvanised steel.
The panels can be supplied perforated or plain, and in any specified length, from 600 to 5000 mm as standard.

Lengths less than 600, and up to 6000 mm can be made to order.
All panels are 26 mm deep and supplied with end closings and 25 mm mineral wool infill as standard.

For projects with a large number of identical cabins, Factory Modified Adaption Panels further reduce installation time and costs.
Plain Panels | DAMPA DCC 300/200
Plain Panels - Type 308/208
Plain surface with infill of
25 mm mineral wool.
Weight: 6.7/6.2 kg/m2
Fire classification: B-0, A-15.

With additional overlay insulation:
Weight: Approx. 8.9/8.4 kg/m2
Fire classification: B-15, A-30, A-60.

Note: The suspension system, based on average consumption rate, weighs 1.5 kg/m2
Perforated Panels | DAMPA DCC 300/200
Perforated Panels - Type 315/215
Perforated with 1.8 mm holes at 3.5 mm centres (20.5%), and with inlay of black acoustic felt.
Infill of 25 mm mineral wool.
Weight: 5.8/5.6 kg/m2
Fire classification: B-0, A-15.

With additional overlay insulation:
Weight: Approx. 8.0/7.8 kg/m2
Fire classification: B-15, A-60.

Note: The suspension system, based on average consumption rate, weighs 1.5 kg/m2
Plain with Air Injection | DAMPA DCC 300/200
Plain Panels with Air Injection Slots - Type 310/210
Plain surface with infill of 25 mm mineral wool.
2 rows of 3 x 7 mm air injection slots at 15 mm centres (air inlet area equal to 0.0028 m2/lin.m ceiling panel).
Infill of 25 mm mineral wool in PE-sleeves.
Weight: 6.7/6.2 kg/m2
Fire classification: C.

Note: The suspension system, based on average consumption rate, weighs 1.5 kg/m2
Perforated with Air Injection | DAMPA DCC 300/200
Perforated Panels with Air Injection Slots - Type 313/213
Perforated Panels with Air Injection Slots
- Type 313/213.
Perforated with 1.8 mm holes at 3.5 mm centres (20.5%), and with inlay of black acoustic felt and infill of 25 mm mineral wool.
2 rows of 3 x 7 mm air injection slots at 15 mm centres (air inlet area equal to 0.0028 m2/lin.m ceiling panel).
Inlay of 25 mm mineral wool in PE-sleeves.
Weight: 5.7/5.6 kg/m2
Fire classification: C.

Note: The suspension system, based on average consumption rate, weighs 1.5 kg/m2
Start and End Panels | DAMPA DCC 300/200
Start and End Panels, Type WOF and WF
narrow ceiling units without flanges. They are identified by the code WOF.

End Panels are narrow versions of the standard shaped ceiling units. They are identified by the code WF.

Type WOF & WF ceiling units are available in the following widths: 75, 100, 125, 137, 150, 175, 200, 225 and 237 mm.
Other widths can be made to order.
Panels with Modified Ends | DAMPA DCC 300/200
Panel with Factory Modified Ends
Ceiling panels can be supplied with factory-formed stepped or mitred ends.
Produced to order and specification.
Panels with Cutouts | DAMPA DCC 300/200
Panels with Cutouts
Panels with factory formed cutouts can be supplied to specification.
For example, circular cutouts to suit downlights, speaker grilles and smoke detectors, and rectangular ones to suit items such as non-integrated luminaires.
Calculating Length of Panels | DAMPA DCC 300/200
Calculation Length of Panels
The lengths of the pre-cut ceiling panels are determined by the internal bulkhead-to-bulkhead measurement minus 50 mm. This provides a closed shadow gap recess of 25 mm at all perimeters to allow for building tolerances.
For wide rooms and / or to make handling easier, featured joints can be introduced. All the advantages of the pre-cut panel concept are maintained.

Shipping and storage: Ceiling panel lengths must not exceed
5700 mm, if standard 20 ft. containers are to be used.