Ceiling Modules | DAMPA 10/100/200/300
The DAMPA 10/100/200/300 Marine Ceiling Systems consist of individual modular demountable linear ceiling panels installed on the same support carriers, in any combination, offering many possible design and functional applications. Additionally, DAMPA 10 is suitable for curved ceiling configurations.
The panels can be supplied perforated or plain, and in any specified length, from 600 to 5000 mm as standard. Lengths less than 600, and up to 6000 mm can be made to order.
All ceiling units are delivered without insulation as standard. However to achieve higher sound absorption values they can be supplied with 12 mm mineral wool infill.
Plain Panels | DAMPA 10/100/200/300
Fire classification: C-class
Length: 600 - 5000 mm

Weight of suspension system:
1.5 kg/m2 (ave. consumption)
Weight of infill of 12 mm mineral wool:
0.3 kg/m2
Type 0 / Type 104
Width: 100 mm
Weight: 1.7 kg/m2
Material thickness: 0.45 mm
End closed

Type 204
Width: 200 mm
Weight: 1.8 kg/m2
Material thickness: 0.55 mm

Type 304
Width: 300 mm
Weight: 2.2 kg/m2
Material thickness: 0.7 mm
Perforated Panels | DAMPA 10/100/200/300
Perforated with 1.0 mm holes at 2 mm centres (22%), and with 0.2 mm inlay of black acoustic felt.

Fire classification: C-class
Length: 600 - 5000 mm

Weight of suspension system:
1.5 kg/m2 (ave. consumption)
Weight of infill of 12 mm mineral wool:
0.3 kg/m2
Type N / Type 103
Width: 100 mm
Weight: 1.6 kg/m2
Material thickness: 0.45 mm

Type 203
Width: 200 mm
Weight: 1.5 kg/m2
Material thickness: 0.55 mm
End closed

Type 303
Width: 300 mm
Weight: 1.8 kg/m2
Material thickness: 0.7 mm
End closed
Plain Panels with Air Injection Slots | DAMPA 10/100/200/300
One or two rows of 3 x 7 mm air injection slots at 10 mm centres.

Fire classification: C-class
Length: 600 - 5000 mm

Weight of suspension system:
1.5 kg/m2 (ave. consumption)
Weight of infill of 12 mm mineral wool:
0.3 kg/m2
Type Q / Type 106
Air inlet area Type Q: 0.0021 m2/lin.m
Air inlet area Type 106: 0.0042 m2/lin.m
Width: 100 mm
Weight: 1.7 kg/m2
Material thickness: 0.45 mm

Type 206
Air inlet area: 0.0042 m2/lin.m
Width: 200 mm
Weight: 1.8 kg/m2
Material thickness: 0.55 mm
End closed

Type 306
Air inlet area: 0.0042 m2/lin.m
Width: 300 mm
Weight: 2.2 kg/m2
Material thickness: 0.7 mm
End closed
Perforated Panels with Air Injection Slots | DAMPA 10/100/200/300
Perforated with 1.0 mm holes at 2 mm centres (22%), and with 0.2 mm inlay of black acoustic felt. One or two rows of 3 x 7 mm air injection slots at 10 mm centres.

Fire classification: C-class
Length: 600 - 5000 mm

Weight of suspension system:
1.5 kg/m2 (ave. consumption)
Weight of infill of 12 mm mineral wool:
0.3 kg/m2
Type P / Type 105
Air inlet area Type P: 0.0021 m2/lin.m
Air inlet area Type 105: 0.0042 m2/lin.m
Width: 100 mm
Weight: 1.9 kg/m2
Material thickness: 0.45 mm

Type 205
Air inlet area: 0.0042 m2/lin.m
Width: 200 mm
Weight: 1.8 kg/m2
Material thickness: 0.55 mm
End closed

Type 305
Air inlet area: 0.0042 m2/lin.m
Width: 300 mm
Weight: 2.1 kg/m2
Material thickness: 0.7 mm
End closed
Calculation of Ceiling Panel Lenghts | DAMPA 10/100/200/300
The lengths of the pre-cut ceiling panels are determined by the internal bulkhead-to-bulkhead measurement normally minus 40 mm. This provides a closed recess of 20 mm at all perimeters to allow for building tolerances.
To make handling easier, featured joints can be introduced in large areas. All the advantages of the pre-cut panel concept are maintained.

Shipping and storage: Ceiling panel lengths must not exceed 5700 mm, if standard 20 ft. containers are to be used.